ASHKARUPA писал(а):Реф.осушитель не в курсе а на крутых адсорберах "плата обнуления" нужна, идет в оригинальном наборе для ТО. Известно что есть наборы 12,24,48 месяцев.
Это да. Сервисный ключ можно скопировать.. А по рефу уже нашёл..
Definitive reset of maintenance warning (parameter b3)
The final reset of maintenance warning “Sr” can be done only through a special procedure which should be confidential and reserved only to qualified service personnel.
Enter the parameter b3 following the standard procedure (enter the parameters menu by pressing together RESET and HISTORY; scroll down the parameters list till reaching b3; enter into the modification loop pressing ENTER (ON/OFF).
“no” will appear on the display, the parameter is locked and can not be changed simply pressing UP or DOWN.
Hold down together the buttons UP and ENTER for at least 5 seconds;
the parameter is now unlocked.
“no” will start to blink on the display.
Press buttons UP or DOWN; on display “YES” will start to blink. Press
ENTER button to confirm.
The maintenance warning is now reset till the dryer is reaching again the working hours threshold (thousand of hours settable with parameter b9).