|
usefi5961 » 09 окт 2019, 09:29
dear members: in atlas copco ga90 vsd after downloading dump files to at28c64 and m48t02 system boot and all is ok,and emergency stop show in display,when connect pin3 of 2x6 terminal(emergency stop pin)to 2x9(12v)error 111101000 system failure 10 appear in display,i check inputs component all is ok,can someone help to fix elektronikon controller?
thanks.
-
-
- Сообщений: 17
- Зарегистрирован: 17 янв 2019, 12:55
- Откуда (город): qazvin
ws2000 » 09 окт 2019, 19:14
hello. judging by the description of the problem, you have on ELEKTRONIKON damaged part of the program. fixed by flashing the control panel. independently is not feasible (I am not aware of confirmed cases of reprogramming on their own). in Your case, you can try to "copy" the data from a similar compressor, but not the fact that everything will work. then, the last and working variant-to cause on reprogramming of the nearest serviceman from representation AC.
моб-вайбер-ватсап: +375292788788 / +79825022349 ws2000@tut.by .. чтоб дело мастера боялось, он знает много страшных слов..
-
- Авторитетный компрессорщик
-
- Сообщений: 1816
- Зарегистрирован: 22 янв 2014, 19:23
- Откуда: Минск / Беларусь / РФ
- Откуда (город): Минск
Вернуться в Автоматизация, автоматика, программное обеспечение, применяемые в компрессорной отрасли, контроллеры
Кто сейчас на форуме:
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 82
|
|