Strange error Gardner Denver ES75
23 июн 2017, 18:11
Hello again forum mates.
Compressor Garnder Denver ES 75 is starting, going onload and when the compressor reaches the load pressure the compressor stops. On the display there are three lines and oFF message.
The controller is Airpilot.
Do you know what this means?
Compressor Garnder Denver ES 75 is starting, going onload and when the compressor reaches the load pressure the compressor stops. On the display there are three lines and oFF message.
The controller is Airpilot.
Do you know what this means?
- Вложения
-
- error.jpg (41.53 KiB) Просмотров: 514
Re: Strange error Gardner Denver ES75
05 июл 2017, 12:02
Hello,
the problem is solved. If someone has similar problems here is our solution:
The controller is energizing regularly the solenoid valve of the drain of the cyclone separator at the outlet of the compressor. In our case the coil of the solenoid valve was burned and shortens the electrical circuit. When that happens, the controller restarts and the strange oFF mark message with three lines appears.
When we changed the coil everything was back to normal.
the problem is solved. If someone has similar problems here is our solution:
The controller is energizing regularly the solenoid valve of the drain of the cyclone separator at the outlet of the compressor. In our case the coil of the solenoid valve was burned and shortens the electrical circuit. When that happens, the controller restarts and the strange oFF mark message with three lines appears.
When we changed the coil everything was back to normal.
Re: Strange error Gardner Denver ES75
05 июл 2017, 14:12
Спасибо за полезную информацию.