Страница 1 из 1

Kaeser DSD 141 (belt drive)

СообщениеДобавлено: 09 ноя 2017, 18:24
i_borisov
Hello,
We have one old compressor Kaeser DSD 141 (yom 2003) that is with belts. We need to change the working pressure of the compressor from 8 Bar to 10 Bar. Since this is not the new direct driver version we need to change the transition ratio. Do you know what is the rotation speed of the airend of the belt driven Kaeser DSD 141 with 10 bar pressure.

Thank you

Re: Kaeser DSD 141 (belt drive)

СообщениеДобавлено: 09 ноя 2017, 18:53
Timich.S
Хм, опять Инглиш.
你好。

Re: Kaeser DSD 141 (belt drive)

СообщениеДобавлено: 10 ноя 2017, 10:44
Evgenii0455
Timich.S писал(а):Хм, опять Инглиш.
你好。

как понял он хочет 8 барный в 10 переделать

Re: Kaeser DSD 141 (belt drive)

СообщениеДобавлено: 10 ноя 2017, 10:47
Evgenii0455
i_borisov писал(а):Hello,
We have one old compressor Kaeser DSD 141 (yom 2003) that is with belts. We need to change the working pressure of the compressor from 8 Bar to 10 Bar. Since this is not the new direct driver version we need to change the transition ratio. Do you know what is the rotation speed of the airend of the belt driven Kaeser DSD 141 with 10 bar pressure.

Thank you

Hello, I understand you want to increase the maximum pressure by changing the transmission ratio of the belt drive?

Re: Kaeser DSD 141 (belt drive)

СообщениеДобавлено: 10 ноя 2017, 11:04
i_borisov
Evgenii0455 писал(а):
i_borisov писал(а):Hello,
We have one old compressor Kaeser DSD 141 (yom 2003) that is with belts. We need to change the working pressure of the compressor from 8 Bar to 10 Bar. Since this is not the new direct driver version we need to change the transition ratio. Do you know what is the rotation speed of the airend of the belt driven Kaeser DSD 141 with 10 bar pressure.

Thank you

Hello, I understand you want to increase the maximum pressure by changing the transmission ratio of the belt drive?


Exactly! Now I need to know the airend speed of compressor Kaeser DS141 at 10 bar in order to make the correct ratio.

Re: Kaeser DSD 141 (belt drive)

СообщениеДобавлено: 10 ноя 2017, 12:11
Evgenii0455
i_borisov писал(а):
Evgenii0455 писал(а):
i_borisov писал(а):Hello,
We have one old compressor Kaeser DSD 141 (yom 2003) that is with belts. We need to change the working pressure of the compressor from 8 Bar to 10 Bar. Since this is not the new direct driver version we need to change the transition ratio. Do you know what is the rotation speed of the airend of the belt driven Kaeser DSD 141 with 10 bar pressure.

Thank you

Hello, I understand you want to increase the maximum pressure by changing the transmission ratio of the belt drive?


Exactly! Now I need to know the airend speed of compressor Kaeser DS141 at 10 bar in order to make the correct ratio.

To begin with, it is necessary to make a belt drive calculation to determine the number of revolutions on the pulley of the screw pair (or to measure with a special device) and the gear ratio of this gear, then information on the screw turns is required at 10 bar compressor version. then pick the pulleys based on the calculation of the new gear.
information on the 10 bar transmission can be found if anyone has a similar compressor in the performance of 10 bar, and in general Kaiser in Russia is a separate conversation)

Re: Kaeser DSD 141 (belt drive)

СообщениеДобавлено: 10 ноя 2017, 13:48
i_borisov
Evgenii0455 писал(а):information on the 10 bar transmission can be found if anyone has a similar compressor in the performance of 10 bar, and in general Kaiser in Russia is a separate conversation)


That is why I am posting this question if someone has a Kaeser compressor DS141 10bar or if someone has information about the airend rotation speed.
Kaeser would not give this information.

Re: Kaeser DSD 141 (belt drive)

СообщениеДобавлено: 11 ноя 2017, 08:52
Android13
My compliments. Please write the engine speed, the diameters of the pulleys.
And the performance of the compressor at 8 bar.

Re: Kaeser DSD 141 (belt drive)

СообщениеДобавлено: 12 ноя 2017, 16:34
Evgenii0455
Android13 писал(а):My compliments. Please write the engine speed, the diameters of the pulleys.
And the performance of the compressor at 8 bar.

Тоже ньюанс) производительность по умолчанию не интересует как понимаю